Part Chamfer/cs

Fillet

MakeFace

Part

Description

Usage

Options

• When selecting edges on the model, you have the option to select by edge or by face. Selecting by face will select all bordering edges of that face.
• Constant length chamfer or variable length chamfer.
  • A constant length chamfer will create a chamfer with edges equidistant to the original edge at the distance specified.
  • A variable length chamfer will have edges that may be set to different distances from the original edge, allowing you to create a chamfer at a variable angle.

Properties

Base

• ÚdajeBase: The shape onto which the chamfer is to be applied.
• ÚdajePlacement: Specifies the orientation and position of the shape in the 3D space.
• ÚdajeLabel: Label given to the object. Change to suit your needs.

Limitations

Chamfer might do nothing if the result would touch or cross the next adjacent edge. So if you do not get the expected result, try with a smaller value. This is the same for Part Fillet.

Also note that the Chamfer feature is affected by the Topological naming problem when the any change is done to a modeling step earlier in the chain that affects the number of facets or vertices. This could cause unpredictable result. Until that is resolved it is advised to apply Chamfer and Part Fillet operations at the last steps in the chain.

Scripting

The Chamfer tool can by used in macros and from the Python console by adding a Chamfer object to the document.

Example Script:

import Part
cube = FreeCAD.ActiveDocument.addObject("Part::Feature", "myCube")
cube.Shape = Part.makeBox(5, 5, 5)
chmfr = FreeCAD.ActiveDocument.addObject("Part::Chamfer", "myChamfer")
chmfr.Base = FreeCAD.ActiveDocument.myCube
myEdges = []
myEdges.append((1, 1.5, 1.25)) # (edge number, chamfer start length, chamfer end length)
myEdges.append((2, 1.5, 1.25))
myEdges.append((3, 1.5, 1.25))
myEdges.append((4, 1.5, 1.25))
myEdges.append((5, 1.5, 1.25))
myEdges.append((6, 1.5, 1.25))
myEdges.append((7, 1.5, 1.25))
myEdges.append((8, 1.5, 1.25))
myEdges.append((9, 1.5, 1.25))
myEdges.append((10, 1.5, 1.25))
myEdges.append((11, 1.5, 1.25))
myEdges.append((12, 1.5, 1.25))
chmfr.Edges = myEdges
FreeCADGui.ActiveDocument.myCube.Visibility = False
FreeCAD.ActiveDocument.recompute()

Example Script Explanation:

import Part
cube = FreeCAD.ActiveDocument.addObject("Part::Feature", "myCube")
cube.Shape = Part.makeBox(5, 5, 5)

• Creates a 5 mm cube for us to apply chamfered edges to. See Part_API for an explanation of the makeBox method.

chmfr = FreeCAD.ActiveDocument.addObject("Part::Chamfer", "myChamfer")

• Adds a new object to the document of type Chamfer (from the Part module) with label "myChamfer".

chmfr.Base = FreeCAD.ActiveDocument.myCube

• Specifies that the base shape of the chamfer object should be "myCube".

myEdges = []
myEdges.append((1, 1.5, 1.25)) # (edge number, chamfer start length, chamfer end length)
myEdges.append((2, 1.5, 1.25))
myEdges.append((3, 1.5, 1.25))
myEdges.append((4, 1.5, 1.25))
myEdges.append((5, 1.5, 1.25))
myEdges.append((6, 1.5, 1.25))
myEdges.append((7, 1.5, 1.25))
myEdges.append((8, 1.5, 1.25))
myEdges.append((9, 1.5, 1.25))
myEdges.append((10, 1.5, 1.25))
myEdges.append((11, 1.5, 1.25))
myEdges.append((12, 1.5, 1.25))

• Creates an empty array "myEdges" and then appends the array with each edge's chamfer parameters.
• Syntax for each item should be (edge#, chamfer start length, chamfer end length)

chmfr.Edges = myEdges

• Sets the Edges attribute of our Chamfer object equal to the array we just created.

FreeCADGui.ActiveDocument.myCube.Visibility = False

• This line simply hides "myCube" so that our newly created "myChamfer" object is the only one visible.

FreeCAD.ActiveDocument.recompute()

• Recomputes all altered components on the screen and refreshes the display.

Fillet

MakeFace

Part

Part

• Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder

---

• Creation and modification: Create sketch, Extrude, Revolve, Mirror, Scale, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Color per face

---

• Boolean: Make compound, Explode compound, Compound Filter, Boolean, Cut, Union, Intersection, Connect objects, Embed object, Cutout for object, Boolean fragments, Slice apart, Slice to compound, Boolean XOR, Check geometry, Defeaturing

---

• Other tools: Import CAD file, Export CAD file, Box selection, Create shape from mesh, Create points object from geometry, Convert to solid, Reverse shapes, Create simple copy, Create transformed copy, Create shape element copy, Refine shape, Attachment

---

• Preferences: Preferences, Fine tuning

User documentation

• Getting started
• Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
• Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

---

• Help: Tutorials, Video tutorials
• Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

---

• Addons: Addon Manager, External workbenches, Scripting and macros

---

• Hubs: User hub, Power users hub, Developer hub